Dual Operator Ironworkers

PII-88 | PII-140 | Compare

Piranha Single Operator Ironworkers are capable of performing most applications. However, when two simultaneous operations are required (e.g. punching and notching), a dual operator ironworker fits the bill.

All Dual Operator Ironworkers have:

Large, open punch station—allows unlimited range of optional equipment and special tooling
Longer strokes/deeper throat depths
Large platen—for options and special tooling applications
Long bending capability—optional bending attachments up to 48"
10 punch and die sets appropriate to machine tonnage
One chip bucket
Automatic 3-position Urethane Hold-Down on Plate, Angle and Bar Shear Stations
Dual Operator Controls—punch station and shear/coper station. Each station has both a foot pedal and joystick
Front and Rear Three-Position Electric Joystick Controls
Set of Plate Shear Knives (4-way)
Set of Angle Shear Knives (8-way top/4-way bottom)
Set of Coper Knives (2-way top/4-way bottom)
Set of Three Coper Table Guides

Available Attachments